What tests are required for aggregates used in road construction and why?
Answer: The following tests are conducted to select aggregates that are suitable for road construction and possess the required specific properties:
-
Abrasion Test
-
Attrition Test
-
Los Angeles Abrasion Test
-
Crushing Test
-
Aggregate Crushing Test
-
Impact Test
-
Soundness Test
-
Specific Gravity Test
-
Water Absorption Test
-
Bitumen Affinity Test
-
Shape Test
Estimate for a Bituminous Road:
Road length = 1500'-0"
Road width = 20'-0"
Road height = 1'-6"
Edging = 3"
Site dressing width = 1'-0"
Sand-aggregate mixed layer (1:1 ratio) height = 6"
Aggregate layer = 4"
1. Earthwork (Excavation) = 1500'-0" x 20'-0" x 1'-6"
= 45,000 cubic feet
2. Earth dressing = 1500'-0" x 20'-0"
= 30,000 square feet
3. Flat brick soling = 1500'-0" x 19'-6"
= 29,250 square feet
[The figure 19'-6" is derived as follows: If 3" is deducted for edging on both sides, then the width = 20'-0" - (3" x 2)
= 19'-6"]
4. Herringbone bond = 1500'-0" x 19'-6"
= 29,250 square feet
5. Brick end-edging on both sides
= 1500 x 2
= 3,000 feet
6. Sand-brick aggregate (khoa) mixture layer (1:1 ratio)
= 1500'-0" x 19'-6" x 6"
= 14,625 cubic feet
7. Aggregate layer = 1500'-0" x 19'-6" x 4"
= 9750 cubic feet
8. Bituminous carpeting
= 1500'-0" x 19'-6"
= 29250 square feet
9. Tack coat = 1500'-0" x 19'-6"
= 29250 square feet
10. Seal coat = 1500'-0" x 19'-6"
= 29250 square feet
11. Blinding of the road surface with sand
= 1500'-0" x 19'-6"
= 29250 square feet
12. Site dressing = 1500'-0" x 1'-0" x 2
= 3000 square feet
