Bhola Sadar Polytechnic Institute
Published on Bhola Sadar Polytechnic Institute (https://www.bspi.edu.bd/bspi20)

Home > Civil Technology

Department of Civil Technology

To prevent rust on steel rods, the following points must be observed during their storage at construction sites and throughout their period of use. Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [1]

To prevent rust on steel reinforcement bars (rebar), the following points must be observed during their storage and use at a construction site:

  •  When storing rebar on-site, it should be placed on a raised platform (skids or dunnage) within a relatively sheltered area; it must never be placed directly on the ground. Contact with mud or soil will lead to the formation of rust, which is a primary factor in reducing the lifespan of the rebar. 

  • Read more about To prevent rust on steel rods, the following points must be observed during their storage at construction sites and throughout their period of use. Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [1]

Pile Integrity Test (PIT) & Details of pile. Author: Engr. Dibakar Dey, IIT-Kharagpur, India [2]

What is a pile integrity test?

Ans: The Pile Integrity Test is a method used to determine the depth of a pile following its construction; it reveals the total depth to which the pile extends.

Why is the PIT test performed?

  • Read more about Pile Integrity Test (PIT) & Details of pile. Author: Engr. Dibakar Dey, IIT-Kharagpur, India [2]

How to determine the weight of an MS rod? Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [3]

How to determine the weight of an MS rod: 

As a civil engineer, it is essential to be familiar with the following conversion system.

10 mm = 0.62 kg/m = 3 suta

12 mm = 0.89 kg/m = 4 suta

16 mm = 1.58 kg/m = 5 suta

20 mm = 2.48 kg/m = 6 suta

22 mm = 2.98 kg/m = 7 suta

25 mm = 3.85 kg/m = 8 suta

  • Read more about How to determine the weight of an MS rod? Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [3]

A detailed discussion on beams Question. Author: Engr. Dibakar Dey, IIT-Kharagpur, India [4]

 What is a beam? How many types are there and what are they?

Ans: A beam is a type of horizontal structural element that rests on one or more supports such as posts, columns, pillars or walls and transfers the applied loads to those supports.

There are 5 types of beams:

i) Simply supported beam,

ii) Cantilever beam,

iii) Overhanging beam,

iv) Fixed (or restrained) beam, and

v) Continuous beam.

  • Read more about A detailed discussion on beams Question. Author: Engr. Dibakar Dey, IIT-Kharagpur, India [4]

Essential structural knowledge for a site engineer. Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [5]

Topics: Shear Key, Casting Height, Lapping, Beam Column Joint, Construction Joint.

  • Shear Key in Columns: In the context of columns, a 'shear key' is a mechanical groove, notch or a protruding structural element (such as a piece of steel embedded in concrete or a recess formed within the concrete) used to interlock two connected components and resist horizontal (shear) forces. 

     

  • Read more about Essential structural knowledge for a site engineer. Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [5]

What is a Mat Foundation? And its Key Aspects – Author: Engr. Dibakar Dey, IIT-Kharagpur, India [6]

Mat Foundation:

When all the columns of a building are connected by a single footing, it is called a mat or raft foundation.

This type of foundation is typically designed when the soil's load-bearing capacity is not uniform across the site, or when the use of individual footings would result in them occupying a significant portion of the building's footprint. 

  • Read more about What is a Mat Foundation? And its Key Aspects – Author: Engr. Dibakar Dey, IIT-Kharagpur, India [6]

What tests are required for aggregates used in road construction and why? Provide an estimate for a bituminous road. Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [7]

What tests are required for aggregates used in road construction and why?

Answer: The following tests are conducted to select aggregates that are suitable for road construction and possess the required specific properties: 

  1. Abrasion Test 

  2. Attrition Test 

  3. Los Angeles Abrasion Test 

  4. Crushing Test 

  5. Aggregate Crushing Test 

  • Read more about What tests are required for aggregates used in road construction and why? Provide an estimate for a bituminous road. Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [7]

An easy way to understand soil test reports. Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [8]

An easy way to interpret soil test reports.

You can easily determine the condition of the soil by looking at the 'N-value' from a soil test:

1. An N-value of 2 or less indicates 'very soft' soil, with a load-bearing capacity of only 2 tons per square meter.

2. An N-value of 2–5 indicates 'soft' soil, with a load-bearing capacity of 2–5 tons per square meter.

  • Read more about An easy way to understand soil test reports. Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [8]

Essential knowledge for civil engineers. Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [9]

  • Read more about Essential knowledge for civil engineers. Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [9]

Questions typically asked of a civil engineer during a viva examination... Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [10]

1. Please, have a seat. May I have your name?

Answer: Thank you, sir.

Md. -----------

2. Where are you currently working?

Answer: Geo-Science Engineering Inspection Service, Jatrabari, Dhaka.

3. What are your responsibilities there?

Answer: Project supervision and office management.

4. Well, could you tell us something about yourself?

Answer: Sir, my home district is Chandpur. I completed my SSC in 1999, my diploma in 2003, and my BSc in 2010. I currently reside in Dhaka.

5. What kind of work are you particularly good at?

  • Read more about Questions typically asked of a civil engineer during a viva examination... Author: Engr. Dibakar Dey, IIT-Kharagpur, India. [10]

Pages

  • 1
  • 2 [11]
  • 3 [12]
  • 4 [13]
  • 5 [14]
  • 6 [15]
  • 7 [16]
  • 8 [17]
  • 9 [18]
  • next › [11]
  • last » [18]
Powered By : Authority, Bhola Sadar Polytechnic Institute
Planned & Implemented By : Authority, Bhola Sadar Polytechnic Institute

Source URL:https://www.bspi.edu.bd/bspi20/en/dept/civil-technology

Links
[1] https://www.bspi.edu.bd/bspi20/en/digital-content/prevent-rust-steel-rods-following-points-must-be-observed-during-their-storage [2] https://www.bspi.edu.bd/bspi20/en/digital-content/pile-integrity-test-pit-details-pile-author-engr-dibakar-dey-iit-kharagpur-india [3] https://www.bspi.edu.bd/bspi20/en/digital-content/how-determine-weight-ms-rod-author-engr-dibakar-dey-iit-kharagpur-india [4] https://www.bspi.edu.bd/bspi20/en/digital-content/detailed-discussion-beams-question-author-engr-dibakar-dey-iit-kharagpur-india [5] https://www.bspi.edu.bd/bspi20/en/digital-content/essential-structural-knowledge-site-engineer-author-engr-dibakar-dey-iit-kharagpur-0 [6] https://www.bspi.edu.bd/bspi20/en/digital-content/what-mat-foundation-and-its-key-aspects-%E2%80%93-author-engr-dibakar-dey-iit-kharagpur [7] https://www.bspi.edu.bd/bspi20/en/digital-content/what-tests-are-required-aggregates-used-road-construction-and-why-provide-estimate [8] https://www.bspi.edu.bd/bspi20/en/digital-content/easy-way-understand-soil-test-reports-author-engr-dibakar-dey-iit-kharagpur-india [9] https://www.bspi.edu.bd/bspi20/en/digital-content/essential-knowledge-civil-engineers-author-engr-dibakar-dey-iit-kharagpur-india-0 [10] https://www.bspi.edu.bd/bspi20/en/digital-content/questions-typically-asked-civil-engineer-during-viva%C2%A0examination-author-engr-0 [11] https://www.bspi.edu.bd/bspi20/en/dept/civil-technology?page=1 [12] https://www.bspi.edu.bd/bspi20/en/dept/civil-technology?page=2 [13] https://www.bspi.edu.bd/bspi20/en/dept/civil-technology?page=3 [14] https://www.bspi.edu.bd/bspi20/en/dept/civil-technology?page=4 [15] https://www.bspi.edu.bd/bspi20/en/dept/civil-technology?page=5 [16] https://www.bspi.edu.bd/bspi20/en/dept/civil-technology?page=6 [17] https://www.bspi.edu.bd/bspi20/en/dept/civil-technology?page=7 [18] https://www.bspi.edu.bd/bspi20/en/dept/civil-technology?page=8