Guidelines for the application of anti-pesticide chemicals in the foundation:
In low-lying areas or places prone to high insect activity, pests may build nests and damage the base of the floor; they can also compromise the soil beneath the foundation. Consequently, chemicals are often applied in such areas to mitigate pest infestations. It is advisable to take proactive measures against potential pest problems in these locations before construction begins, ensuring that such issues do not arise after the building is completed. Therefore, before constructing a building, a specific anti-pest chemical is applied to the foundation to eliminate termites or other harmful insects.
Typically, after the soil has been compacted, this chemical must be applied to the soil in a precise, specified quantity.
How should it be applied?
Anti-pesticide treatment is generally applied before the construction of the foundation. The application methods are discussed below:
1. Anti-pesticide treatment is applied during the excavation phase for the foundation for instance, when digging for footings or grade beams. Typically, the anti-pesticide is applied to the bottom and the sides of the footing pits.
There are two methods for applying anti-pesticides.
-
Spraying: In this method, an anti-pesticide solution is applied using a spray machine. The solution is sprayed onto the floor at a rate of 5 liters per square foot. When applied along the sides of the foundation, the spraying is carried out up to a height of 30 centimeters.
-
Drilling (Holes): In this method, holes are drilled into the floor at specific intervals, and the anti-pesticide solution is introduced into them. When applying the anti-pesticide to the surface beneath the foundation or to the floor, holes must be drilled at 30-centimeter intervals, with each hole having a depth of 15 centimeters.
2. In areas that are low-lying or prone to heavy pest infestations, anti-pesticide treatment is applied to the floor. This process involves applying the anti-pesticide across the entire floor area after the ground has been properly compacted. Before application, the floor surface must be thoroughly cleaned to ensure it is completely free of any dirt or debris.
3. The floor must be properly compacted and the floor elevation must be kept level.
4. The anti-pest agent must be mixed correctly, in accordance with the instructions provided on the packaging.
5. When applying into holes, ensure that each 15 cm hole is completely filled.
In addition to these general application guidelines, specific cases may require adherence to the instructions provided on the packaging. In areas prone to high pest infestation, proactive measures for pest control should be taken before construction begins.
