What is meant by an overhead line in transmission and distribution? What are the components of an overhead line? Author: Engr. Dibakar Dey, IIT-Kharagpur, India.
Question: What is meant by an overhead line in the context of transmission and distribution?
Answer: An overhead line is essentially a structure used for the transmission and distribution of electrical power to distant locations. It is typically constructed using towers and poles. The successful operation of an overhead line generally depends on its mechanical design. These lines can be subject to damage for various reasons. Therefore, it is essential to ensure that overhead lines are constructed with careful consideration for proper design and safety factors, enabling them to withstand adverse environments. Furthermore, priority should be given to their mechanical strength to ensure they can endure potentially harsh weather conditions.

Question: What are the components of an overhead line?
Answer: The components of an overhead line are:
-
Conductor
-
Support
-
Insulator
-
Cross Arm
-
Guy and Stay
-
Fuses & Isolating Switches
-
Lightning Arrester
-
Continuous Earth Wire
-
Guard Wire
-
Vibration Dampers
-
Jumpers
-
Bird Guards
- Conductor: A conductor is used to transmit electrical power from one location to another. Materials such as copper, aluminum, steel-cored aluminum, galvanized steel and cadmium-copper are used to manufacture conductors for overhead lines.

-
Support: In the context of overhead lines, 'support' refers to structures such as towers, posts or poles. These supports serve to hold the overhead line conductors at a safe distance above the ground. The type of support required for an overhead line is determined based on the line's operating voltage.

-
Insulator: An insulator serves as a support for a conductor. It also helps to insulate the conductor from the ground. Insulators used in overhead lines include pin, strain, suspension and shackle types.

-
Cross Arm: Cross arms support the insulators. They are typically made of steel angle sections or wood. Insulators are attached to them near the top of the pole using nuts, bolts, clamps etc.

-
Guy and Stay: Towers or poles in a distribution line that are at risk of leaning are secured using 'guy and stay' cables. High-tensile steel cables are employed for this purpose. One end of the stay cable is attached to the top of the pole using a clamp, while the other end connected via a guy insulator is anchored to a ground anchor (stay set) to provide tension. This prevents the pole from leaning.

-
Fuses & Isolating Switches: These are used to disconnect various parts of an overhead system whenever necessary.

-
Lightning Arrester: Lightning arresters are used on overhead lines to protect the lines by discharging excess voltage into the ground.

-
Continuous earth wire: To protect an overhead line by easily discharging excess voltage caused by lightning strikes into the ground, a continuous earth wire is run along the very top of the towers or poles.

-
Guard wire: When a power line crosses a telephone or telegraph line, guard wires are installed above and below the power lines. These wires are connected to the earth.

-
Vibration Dampers: Vibration dampers are installed on the insulators of overhead lines to prevent the occurrence of vibrations.

-
Jumpers: In overhead lines, a connection between one conductor and another is established using a jumper.

-
Bird Guards: These are attached to the cross-arm above the insulator to prevent birds from causing a flashover between the insulator pin and the conductor. They are made of ebonite and feature long, saw-tooth like plates mounted on the top.

In addition, several other smaller components are installed on overhead lines, such as phase plates, danger plates, anti-climbing wires, guards etc.
