Bhola Sadar Polytechnic Institute
Published on Bhola Sadar Polytechnic Institute (https://www.bspi.edu.bd/bspi20)

হোম পেজ > What is retrofitting? Author: Engr. Dibakar Dey, IIT-Kharagpur, India

What is retrofitting? Author: Engr. Dibakar Dey, IIT-Kharagpur, India

What is retrofitting?

Retrofitting is the process of enhancing or strengthening an existing building or structure by adding new components to it.

Why is retrofitting performed on buildings?

Retrofitting is carried out for various reasons; some of the primary reasons are outlined below:

1. When a building has been constructed without strictly adhering to building codes.

2. In many cases, retrofitting becomes necessary due to flaws in the original design.

3. The structural strength of a building may need to be increased if it has been damaged due to long-term use or an unforeseen natural disaster.

4. This also applies when significant modifications are made to a building that deviate from its original design (for example:- extending the building upwards or laterally, even when no such provision was originally included).

5. Changing the usage of a building (for example: if a residential building is repurposed for industrial or commercial use, its load-bearing capacity is affected, necessitating structural strengthening). It is for reasons such as these that building retrofitting or structural strengthening becomes necessary.

What types of retrofitting are typically performed on buildings?

1. Reinforcement strengthening

2. Externally bonded plates

3. Shear or compression strengthening

 

#Various Methods of Retrofitting:

There are several common methods used in retrofitting. Some of the most widely practiced methods are discussed below.

1.Concrete Jacketing of Columns

2.Steel Profile Jacketing of column

3.Addition of Shear Wall

4.Addition of extra Structural Member

5.Ferro-cement Jacketing

6.Fiber Reinforced Polymer Wrapping

7.Concrete Jacketing of Columns

 

#Advantages:

1. Increases concrete confinement in the column.

2. Enhances the load-bearing capacity of the column.

3. Increases the shear capacity of the column.

4. Enhances the flexural strength of the column.

5. This method is more cost-effective compared to other retrofitting techniques.

6. It is the simplest method and can be applied with great ease.

#Disadvantages:

1/ This method leads to a significant increase in column size, which compromises the architectural appearance of the structure.

2/ The increase in column size results in a reduction of available space.

 

 

 

 

 

Department: 
সিভিল টেকনোলজি [1]
সার্বিক সহযোগিতায়: ভোলা সদর পলিটেকনিক ইনস্টিটিউট, কর্তৃপক্ষ
পরিকল্পনা ও বাস্তবায়নে: ভোলা সদর পলিটেকনিক ইনস্টিটিউট, কর্তৃপক্ষ

Source URL:https://www.bspi.edu.bd/bspi20/bn/digital-content/what-retrofitting-author-engr-dibakar-dey-iit-kharagpur-india

Links
[1] https://www.bspi.edu.bd/bspi20/bn/dept/civil-technology