What is an engine? Various questions and answers regarding it - - - Author: Engr. Dibakar Dey, IIT-Kharagpur, India.
01. Question: What is an engine?
Answer: An engine refers to an automated machine that operates by utilizing thermal energy generated through the combustion of fuel. It converts this thermal energy into mechanical energy, which it then uses to power itself as well as other machinery.
02. Question: How many types of engines are there, and what are they?
Answer: There are two types of engines:
1. IC Engine or Internal Combustion Engine.
An internal combustion engine is an engine that generates power by combusting a mixture of air and fuel within the combustion chamber or the interior of its cylinder.

Causing combustion of an air-fuel mixture outside the engine. (It’s impossible.)

Types of IC engines:
Based on the fuel used, there are 3 types:
a) Petrol or gasoline engine

b) Diesel engine

c) Gas engine.

Based on the method of ignition, there are 2 types:
a) Spark ignition

b) Compression ignition
Based on the number of strokes, there are 2 types:
a) Two-stroke
b) Four-stroke

Based on valve positioning, there are 4 types:
a) L-Head or side-valve engine.
b) I-Head or in-line valve engine.
c) F-Head engine.
d) T-Head engine.
Abbreviated as LIFT.

Based on the number of cylinders, engines can be classified as follows:
1) Single-cylinder engine.
2) Two-cylinder engine.
3) Three-cylinder engine.
4) Four-cylinder engine.
5) Six-cylinder engine.
6) Eight-cylinder engine.
Based on the cooling system, engines are of two types, namely:
1) Air-cooled engine.

2) Water-cooled engine.

Based on the cylinder arrangement, engines can be classified into the following categories:
1) Inline engine.

2) V-type engine.

3) Radial-type engine.

4) Opposed-cylinder engine.

5) Radial cylinder engine.

03. Question: What is a diesel engine?
It is a high-compression, compression-ignition internal combustion engine. It generates intense heat by compressing only the air inside the cylinder. It then produces thermal energy by burning diesel fuel at high speed.
04. Question: In what year was the diesel engine invented? Who was the inventor?
Answer: Dr. Rudolf Diesel; 1893.
05. Question: What is a petrol engine?
Answer: A petrol engine (known as a gasoline engine in North America) is a type of internal combustion engine that burns petrol to produce mechanical energy.
06. Question: What is meant by CIE and SIE?
Answer: CIE = Compression Ignition Engine (refers to a diesel engine) and
SIE = Spark Ignition Engine (refers to a petrol engine)
07. Question: What is an engine?
Answer: An engine is a specialized machine composed of many components; it operates autonomously to convert thermal energy into kinetic energy.

08. Question: What is engine power?
Power is defined as the work produced within an engine cylinder over a given period of time; it can also be described as the rate at which work is performed. The unit of power is the watt (W). Engine power depends on torque.

09. Question: What is meant by engine efficiency?
Answer: Engine efficiency refers to the effectiveness of an engine in performing work. In this context, it signifies the relationship or ratio between the work input (energy supplied) and the work output (useful work obtained). Specifically, for an engine, efficiency is defined as the ratio between the work output obtained from the engine (BHP) and the work input supplied to it. (BHP = Brake Horsepower)

10. Question: Why is tappet clearance provided?
Answer: Tappet clearance is provided to accommodate the expansion of the valve stem due to heat while the engine is running.
b) What is meant by tappet clearance?
Answer: The gap between the valve tip and the rocker tip is called tappet clearance.
11. Question: What is meant by a 'cycle'?
Answer: The sequence of operations performed inside the cylinder as the crankshaft rotates is called a 'cycle'.
12. Question: Why is a supercharger used in an engine? / What is the function of a supercharger?
Answer: The function of a supercharger is to force air into the engine cylinders at a pressure higher than atmospheric pressure, thereby increasing the engine's volumetric efficiency.
13. Question: What is priming?
Answer: Priming is the process of lubricating various engine components (such as bearings and the valve mechanism) before starting the engine. This helps prevent the moving parts from sticking and reduces wear caused by friction.
14. Question: What is the function of an oil scraper ring?
Answer: An oil scraper ring (or oil control ring) is used to scrape excess lubricating oil from the cylinder wall and return it to the crankcase.
15. Question: Name five components of an injector.
Answer: Nozzle, nozzle valve, nozzle valve spindle, nozzle valve spring, and pressure adjusting screw.
16. Question: State the function of an engine's connecting rod.
Answer: It converts the reciprocating motion of the piston into the rotary motion of the crankshaft,
and the power generated in the combustion chamber is transmitted to the crankshaft through it.
17. Question: State the differences between two-stroke and four-stroke engines.
Answer: Differences between two-stroke and four-stroke engines: In a two-stroke engine, one cycle is completed in a single rotation (360°) of the crankshaft; in a four-stroke engine, it takes two rotations (720°).
A cycle is completed in two rotations (720°) of the crankshaft.
It features an intake port and an exhaust port/valve.
It has an intake valve and an exhaust valve.
Typically, beveled pistons are used.
Typically, flat, concave, or crowned pistons are used.
Fuel and lubricating oil consumption is high.
Fuel and lubricating oil consumption is relatively low.
18. Question: State some of the purposes of a lube oil system.
Answer: Lubricating, cooling, cleaning, sealing, and noise reduction.
19. Question: State the purposes of an air intake system.
Answer: Supplying clean and cool air to the cylinders, providing pressurized air, cooling the associated components, reducing noise, and expelling residual burnt gases.
20. Question: What is meant by scavenging?
Answer: The process of pushing exhaust gases out of the combustion chamber using intake air is called scavenging.

Some important engine-related concepts that everyone should know:
1] Top Dead Centre (TDC): This refers to the position of the crankshaft where the piston is at its highest point—that is, at its closest position to the cylinder head.
2] Bottom Dead Centre (BDC): This refers to the position of the crankshaft where the piston is at its lowest point—that is, at its farthest position from the cylinder head.
3] Bore: The diameter of an engine cylinder is called the 'bore'.
4] Stroke: The movement of the piston from TDC to BDC is called a 'stroke'.
5] Clearance Volume: The volume within the cylinder above the piston (including the combustion chamber) when the piston is at Top Dead Centre (TDC) is called the Clearance Volume.
6] Piston Displacement: The volume swept by the piston as it moves from Top Dead Centre (TDC) to Bottom Dead Centre (BDC) is called Piston Displacement. It is also known as Swept Volume.
If the cylinder bore is denoted by 'd' and the stroke by 's', then the Piston Displacement (Vs) is given by: Vs = (π/4) * d² * s ......{1}
7] Engine Capacity: This refers to the combined piston displacement—or swept volume—of all the cylinders.
If there are *n* number of cylinders and the piston displacement is denoted as *Vₛ*, then the engine capacity (*Vd*) is given by:
Vd = Vₛ * n .......... {2}
8] Compression Ratio: This indicates the extent to which the engine charge is compressed. The compression ratio is determined by the ratio of the cylinder volume when the piston is at Bottom Dead Center (BDC) to the volume when the piston is at Top Dead Center (TDC). If the compression ratio is denoted by 'r', then:
r = (Vs + Vc) / Vc ....... {3}
For a petrol engine, the compression ratio is typically above 8 to 10, whereas for a diesel engine, it ranges between 15 and 24.
9] Mean Effective Pressure: This is the average effective pressure throughout the entire power stroke. In practice, the cylinder pressure varies significantly during the power stroke.
It is expressed in units of bars or kilopascals (1 bar = 100 kPa).
10] Power: This is defined as the rate at which work is performed over a given period of time. Performing the same amount of work in a shorter time or performing a greater amount of work requires more power.
11] Indicated Power (IP): The power developed within an engine cylinder is called Indicated Power. It is determined from the area of the engine indicator diagram.
12] Brake Power (BP): The actual power delivered to the crankshaft is called Brake Power. It is the power remaining after accounting for the energy losses that occur between the generation of Indicated Power (IP) and the crankshaft. It is measured using a dynamometer and expressed in kilowatts (kW). It is always less than the Indicated Power (due to the nature of the reciprocating mechanism and frictional losses).
13] Engine Torque: The rotational force exerted around the crankshaft at any given moment.

This can be expressed as: T = Fr ........ {4}
Where,
T = Engine Torque (Nm)
F = Force applied to the crankshaft
r = Effective crank radius (m)
Since the value of 'r' changes during the power stroke, the torque also varies during that phase.
Furthermore, no torque is delivered during the other three strokes. Consequently, engine manufacturers always specify the average torque produced over the course of an engine cycle.
